Unical ALKON 100, Installation And Servicing Manual

Page: 66 / 76

30
4.4 - OPERATION PARAMETER PROGRAMMING
ATTENTION!
Function reserved for Authorised Assistance
Centres only.
1 sELECTION
With knob ‘‘C’’ select simbol . Push button ‘‘A’’ and
Wait for scanning device
3 sELECTION DEvICE sETTING
Selection with knob ‘‘C’’ and push buton ‘‘A’’ , to enter
in programming list for each device (requires password
0000).
4 sELECTION
Selection parameter with knob ‘‘C’’
Push button ‘‘A’’ (select),
5 MODIFY
Turn knob ‘‘C’’ to modify value
Push button ‘‘A’’ (save),
2 sELECTION DEvICE sETTING
The display shows the status and the active sections of the
system: (- = inactive / 1 active)
• HCM
(Cascade controller)
• SHC (Multifunction module)
• BMM (Burner manager module)
Select device with the knob ’’C’’ and confirm with ’’A’’.