Quick Start Guide UTS1000B/T Series
6
/
18
Instruments.uni-trend.com
User Interface
Figure 1-2 User Interface
1. Working mode: RF analysis, vector signal analysis, EMI, analog demodulation
2. Sweep/Measuring: Single / continuous sweep, tap the screen symbol to quick step through the mode
3. Measuring bar: Display the measurement information which includes input impedance, input attenuation,
presetting, correction, trigger type, reference frequency, average type, and average/hold. Touch screen
sign to quick switch these mode.
4. Trace Indicator: Display the trace line and detector message which includes number of trace line, trace
type and detector type
Note
The first line is display the number of trace line, color of number and trace should be the same. The
second line is display the corresponding trace type which includes W (refresh), A (average trace), M (the
maximum hold), m (the minimum hold).
The third line is display the detector type which includes S (sampling detection), P (peak value), N (normal
detection), A (average), f (trace operation). All detection type are displayed in white letters.
Tap screen sign to quick switch different modes, different letter presents different mode.
Letter in highlight white color, it presents the trace is being update;
Letter in grey color, it presents the trace is not update;
Letter in grey color with strikethrough, it presents the trace will not be update and display;
Letter in white color with strikethrough, it presents the trace is being update but no display; this case
is useful for trace mathematical operation.
5. Display Scale: Scale value, scale type (logarithm, linear), scale value in linear mode cannot change.
6. Reference Level: Reference level value, reference level offset value
7. Result of Cursor Measurement: Display the current result of cursor measurement which is frequency,
amplitude. Display time in zero span mode.
8. Panel Menu: Menu and function of hard key, which includes frequency, amplitude, bandwidth, trace and
marker.
