UTL8500 Series User Manual
21
Figure 4-1-4-1
Setting Interface of CP Mode
Operation Steps:
1. In initial interface, select [Mode], and then press [CP] to enter the setting interface of
<Constant Power CP>.
2. Move the cursor to power setting by pulse knob, and press the Enter button
to
change the power value (the value changes from yellow to white) by keyboard or pulse
knob. Press the Enter button
again to confirm. At this time, the set power value
changes from white to yellow.
3. Other parameters can be modified in a similar way.
4. Press the ON button, the electronic load starts to load, and the indicator light below the
button lights up. If you need to stop the load, press the ON button again, and the
running indicator light goes out.
Figure 4-1-4-2 Relationship of Voltage and Current in CP Mode
Constant Power
