5
Model UT805: OPERATING MANUAL
Safety Information
This Meter complies with the standards IEC61010: in
pollution degree 2, overvoltage category (CAT. I 1000V,
CAT II 600V) and double insulation.
CAT. III: Distribution level, fixed installation, with smaller
transient overvoltage than CAT. IV.
CAT IV: Primary supply level, overhead lines, cable
systems etc.
Use the Meter only as specified in this operating manual,
otherwise the protection provided by the Meter may be
impaired.
In this manual, a
Warning
identifies conditions and
actions that pose hazards to the user, or may damage
the Meter or the equipment under test.
A Note identifies the information that user should pay
attention on.
International electrical symbols used on the Meter and
in this Operating Manual are explained on
page 7.
Rules For Safe Operation
Warning
To avoid possible electric shock or personal injury,
and to avoid possible damage to the Meter or to the
equipment under test, adhere to the following rules:
Before using the Meter inspect the case. Do not use
the Meter if it is damaged or the case (or part of the
case) is removed. Look for cracks or missing plastic.
Pay attention to the insulation around the connectors.
Inspect the test leads and power cord for damaged
insulation or exposed metal. Check the test leads
for continuity. Replace damaged test leads and power
cord with identical model number or electrical
specifications before using the Meter.
Inspect the VFD display for no display..
Do not apply more than the rated voltage, as marked
on the Meter, between the terminals or between any
terminal and grounding.
l
l
l
l
Summary of Contents for UT805
Page 1: ...Model UT805 OPERATING MANUAL ...
Page 2: ......
