- 11 -
2) Charging is about 5 hours from
to
electric charge. Whether the battery is fully
charged depends on the charging indicator. The red light means charging, and the green
light means it is fully charged.
3) When the battery is fully charged, it can be used continuously for 4 to 8 hours, and the
screen brightness and different load power consumption are also different; assuming that
the 3Ω range is used all the time and the screen brightness is adjusted to the lowest level,
the maximum output current is about 8 hours.
4) When the boot screen flashes, the screen goes black. It may be that the battery power is
not enough to boot. Please charge it fully before starting the measurement.
5) The battery life of the new meter can be charged and discharged about 500 times. When
the battery is not durable, you can contact the meter dealer to replace it. Do not replace it
yourself.
9.2 Repair, inspection and cleaning
Warning
Please do not modify, disassemble or repair. Otherwise, it may cause fire,
electric shock or personal injury. If you disassemble or remodel it
yourself, you will be deemed to have given up the one-year free warranty
service.
1) Calibration
The calibration cycle varies depending on the customer's usage conditions or environment. It
is recommended to determine the calibration cycle according to the customer's use condition
or environment, and entrust our company to perform calibration on a regular basis.
2) Clean
When cleaning the instrument, please use a soft cloth dipped in a small amount of water or
neutral detergent, and then wipe it gently. Please gently wipe the display area with a dry soft
cloth.
Please do not use gasoline, alcohol, acetone, ether, methyl ketone, thinner and detergent
containing gasoline. Otherwise it will cause the instrument to be deformed or discolored.
3) Transport
In order to avoid secondary injury caused by impact during transportation, double packaging
must be carried out. We do not guarantee the damage caused by transportation.
When returning for repair, please write down the fault content and the return address, contact
person, telephone and other necessary information in paper with the instrument and send it
back to us.
9.3 Common problem
Question
Answer
Why is the time of the meter
inaccurate?
The internal clock system is powered by the battery of the
meter, not a button battery. Therefore, the clock system
needs to be fully charged to work normally. If it is not used
for a long time, it should be charged once every 3 months.
Why does it keep displaying "-----"
during measurement?
Please check whether the test line is well connected, and
whether the interface is fully plugged in. Generally, "-----"
will be displayed when the loop is not connected.
What does it mean to show OL?
The measurement is out of range.
