UNI-T UT60H, Operating Manual, Page: 27 / 42

Model UT60H: OPERATING MANUAL
27
Measurement Operation(13)
J. Temperature Measurement
(see figure10)
( figure 10)
Warning
To avoid harms to you, please do not attempt to input
voltages higher than 60V DC or 30V rms AC.
The temperature measurement range is -40
o
C~400
o
C.
To measure temperature, connect the Meter as follows:
1. Set the rotary switch to
o
C, the LCD displays room
temperature.
2. Insert the multi-purpose socket into the Meter as the
figure 10.
3. Insert the point contact temperature probe into the
multi-purpose socket
4. Place the temperature probe to the object being
measured.
The measured value shows on the display after
several seconds.
Note
l
Place the Meter in an environment of 18~23
o
C
otherwise false reading may be obtained especially
in testing low temperature.
l
When temperature measurement has been completed,
remove the temperature probe away from the multi-
purpose socket, and remove the multi-purpose socket
away from the Meter.