UNI-T UT60H, Operating Manual, Page: 26 / 42

Model UT60H: OPERATING MANUAL
26
Measurement Operation(12)
I. Frequency Measurement
(see figure 9)
( figure 9)
Warning
To avoid harms to you, please do not attempt to input
voltage higher than 30V rms.
The measurement ranges are:40Hz, 400Hz, 4kHz, 40kHz,
400kHz, 4MHz, 40MHz and 400MHz.
To measure frequency, connect the Meter as follows:
1. Insert the red test lead into the Hz terminal and
the black test lead into the COM terminal.
2. Set the rotary switch to Hz .
3. Connect the test leads across with the object
being measured.
The measured value shows on the display.
l
The requirement of Input amplitude “a” is as follows: