Note
Press
ZERO
to display the present value as stored value and display zero.
After that, all the measurement result displayed will automatically subtract
the stored value.
Press
ZERO
again to display the stored value.
Press and hold
ZERO
to exit and back to normal operation.
5. Power on the tested conductor current, read out the reading after the Meter is
stable.
6. This DC currrent measurment result is more accurate.
The Meter adopts relative value zeroing.
When measuring DC current, if the reading is positive, then the current direction
is from up to down (see figure 9: the front case face up while the bottom case
face down)
When current measurement has been completed, disconnect the connection
between the conductor under test and the jaw, and remove the conductor away
from the transformer jaw of the Meter.
Model UT209: OPERATING MANUAL
29
