Owner’s manual
10
EN
Warning:
• The LCD displays „1” indicating open-circuit for the tested
resistor or the resistor value is higher than the maximum
range of the meter.
• To maintain the resistance measurement accuracy, discount
circuit power and discharge all the high voltage capacitors
during the measuring resistance.
• For high-resistance measurement greater than 1M , it is
normal to take several seconds to obtain a stable reading with
short test leads for measurement.
• Do not input higher than DC 60V and AC 30V voltage to pre
-
vent any damage and accident.
III. Resistance measurement (see diagram 4)
1)Turn rotary switch to “
” ohm measurement.
2) Insert the red test lead into the “ ” terminal and the black test
lead into the “COM” terminal. Connect the test leads across with
the object being measured. The measured value shows on the
display.
