MANUAL - SPRAY GUN CLEANERS - UG5000W SERIES
Revision 2019-3
12
INSTALLING SPRAY GUNS INTO WASH TANK
• Loosen the air cap of the spray gun 2 turns.
To lock the trigger in the open position:
• Use the Trigger Lock Spring as shown in photo. See photo below.
To prevent solvent from entering the air passage way of your
spray gun select one of the following methods suitable for your gun
:
• Attach the knurled nut that is attached to the trigger clamp
chain or insert the white plastic plug into the air inlet of the
spray gun as shown in the photo.
• Place the spray gun on a nozzle extension in the wash tank with the air cap facing the corner. See
photo below and on the next page.
Remove
Gauge
Trigger Lock Spring
Trigger Lock Spring
On Spray Gun
Air Plug inserted into the Air
Passage way of the spray gun
Placing Spray Gun on
Nozzle Extension
