11
MANUAL - SPRAY GUN CLEANERS - UG5000W SERIES
Revision 2019-3
CLEANING OPERATION
CLEANING SOLVENTBORNE SPRAY GUNS IN LEFT SOLVENT TANK
PRE-CLEAN
• Disconnect the spray gun from the air line.
• Remove disposable cup from the spray guns as shown
below in photo on right. Please be advised that
in some jurisdications the cup must be dried before disposal.
• Squirt solvent into the disposable cup adapter, shown in
photo on far right.
• Pull the trigger and allow waste solvent to drain into
a waste container (not supplied).
• Do not mix water and solvent waste.
SELECT NOZZLE EXTENSION
• The installed nozzle extension in the tank, part 780-3530, photo below, is for a disposable cup
system, not for use with a conventional cup system.
• The chart and photos below describe the use for the push on nozzle extensions.
• Place the nozzle extension on the nozzle in the cleaning tank as shown in the photo, Wash
Tank, on the next page.
780-3530
110-430
780-3530
110-430PPS
110-430
Type of
Spray Gun
Most Disposable
Cup Systems
with larger
openings.
Same nozzle as 780-3530 for
use with disposable cup sys-
tems and conventional cup
systems with a large opening.
Conventional
Cup System
with Narrow
Opening.
Mount
Fixed in tank
Push-on
Push-on
Length (")
2.5
7.5
8.0
Included in
Spray Gun
Cleaner
Yes
Yes Yes
110-430PPS
