9
MANUAL - SPRAY GUN CLEANERS - UG4000 SERIES
DAILY MAINTENANCE
FILTER PADS AND SCREEN
•
Inspect the filter pad located in the tank of the gun cleaner and clean it if there is a build up of
paint debris. Clean by removing the filter pad and washing away paint particles with clean sol-
vent. Replace the filter pad when damaged.
Inspect the screen, located below the filter and clean when necessary.
•
Drain and flush the Moisture Filter, allowing air under pressure to flow through it.
REPLACING SOLVENT
•
Disconnect the Suction Pipe from the Drain Valve and remove the pipe from the pail. Move the
pail out of the cabinet and recycle or dispose of the wash solvent. .
•
Place a new, full-pail of clean solvent in front of the cabinet.
•
Move the pail into the cabinet and re-connect the Suction Pipe to the Drain Valve.
