7
MANUAL - SPRAY GUN CLEANERS - UG1000-3000 SERIES
OPERATION
PRE - CLEAN
•
Disconnect the spray gun from the air hose. Pour paint from the cup (when present) into a 5 gal-
lon pail (not supplied).
•
Rinse cup with solvent and pour into the same 5 gallon pail for later disposal or recycling.
CLEANING SPRAY GUNS AND CUPS
•
Loosen the air cap of the spray gun two full turns.
•
Lock the trigger in the open position with the Trigger Lock Spring.
•
Plug air inlet of spray gun with cap to prevent solvent from entering passage. Caps are supplied in
the accessory kit.
SPRAY GUNS AND CUPS
•
Place spray guns facing corner jets. Placement depends on
type of spray gun
. See pictures.
Place cups onto the low spray jets and cup holders.
