Uni-Hydro PRO 56, Owner'S Manual

Page: 3 / 73

Revised - January 2009
- i -
TABLE OF CONTENTS
MAIN BODY ASSEMBLIES ASSY # PAGE
Punch Station PRO56-01 16-17
Power Cavity Station PRO56-02 18
Notcher Station PRO56-03 19
Main Body Assembly PRO56-04 20
Body Assembly with Arms PRO56-05 21-22
Bar Shear Station Hold-Down PRO56-06 23-24
Base and Cover Assembly PRO56-07 25
Foot Pedal Linkage Assembly PRO56-08 26
Power Unit Hydraulics PRO56-09 27-28
POWER UNIT ELECTRICAL
3 Phase, 480 Volt - Direct Drive PRO56-10 29
3 Phase, 240 Volt - Direct Drive PRO56-11 30
1 Phase, 240 Volt - Direct Drive PRO56-12 31
ACCESSORIES & TOOLING
Slug Type Angle Shear 3" X3" X .375" 4406 32
Sever Shear Housing 2615 33
Sever Angle 4 x 4 x 3/8" Blade Set with Hardware 2730 34
Sever Rod Blade Set with Hardware 2756 35
Sever Channel 2' x 3" Blade Set with Hardware 4431 36
Sever Channel 4" Blade Set with Hardware 4432 37
Square Notcher 1-3/4" x 2" x 1/4" 1276 38
Coper Notcher 3 x 3 x 1/4" Angle 1277 39
Pipe Notcher Assembly 3080 40
Punch & Die Chart 41
6" Punch Station Brake 3212 42
6" Power Cavity Brake 2591 43
Punch Adjustable Jig Table 2549 44
Bar Shear Table Complete 2394 45
Standard Stripper Complete 2479 46
Standard Die Stand Complete 2969 47
Oversize (1 1/2") Stripper Complete 2482 48
Oversize (1 1/2") Die Stand Assembly Complete 4762 49
Oversize (1 5/8") Stripper Complete 2483 50
Oversize (1 5/8") Die Stand Assembly Complete 4761 51
Die Stand Assembly 150 Series Complete 2752 52
Die Stand Assembly 500 Series 4409 53
Offset Die Stand (S-Series) Complete 2748 54
Bar Shear Stop 2540 55
Deluxe Back Gauge 6 ft 2521 56
Punch Rack Assembly 3389 57
Steel Bin Catcher 4144 58