Uni-Hydro PRO 56, Owner'S Manual

Page: 2 / 73

TABLE OF CONTENTS
PAGE
FOREWORD 1
MACHINE SETUP INSTRUCTIONS 2-3
Machine Location 2
Machine Preparation 2
Electrical Connections 2
Lubrication 3
OPERATING INSTRUCTIONS 3-6
Pre-Operating Instructions 3
Practice Operations 3-4
Operating the Model PRO56 Ironworker 4
Stroke Control Adjustment 4
Punching Operation 4-5
Sever Angle Shear Operation 5
Notcher Station Operation 5
Bar Shear Operation 5-6
MAINTENANCE 6-7
Punch Installation 6
Double Locking the Punch 6
Removing and Replacing Angle and Bar Blades 7
Standard Angle Shear 7
Machine Maintenance 8
LUBRICATION 8-9
Machine Components 8
Hydraulic System 8
Oil Level 8
Lines and Fittings 8
Hydraulic Oil Change 9
Tonnage Chart 10
TROUBLE SHOOTING 11
Proper Care of Punches and Dies 12
Lining up Punch and Die 12
Lubrication 12
Stripping 12
Loose Nuts and Shank 12
WARRANTY
13
General Wiring Schematic 14
GE Control Box 15