Operating and mounting manual
(translation)
EVS
________________________________________________________________________________________________________
220.100.022-10
page 2 /19
edition 10/2013
TM 3300
1.0 General
Remarks
This operating manual includes instructions to assemble and operate the valve in the prescribed and
safe way.
Additionally, the adeqaute operating instructions (BTA) of each special solenoid drive
must be considered.
Series MG...
220.100.038
Series MG...X
220.000.040
Series MG…Xme
220.000.039
If any difficulties appear that can not be solved by means of the operating manual, further information
may be demanded from the manufacturer.
This operating manual is in accordance with the relevant valid EN safety standards and the valid
prescriptions and rules of the Federal Republic of Germany.
If the solenoids are used abroad of the FRG, the operator and/or the person who is responsible for the
plant concept must take care that the valid national rules are met.
The manufacturer reserves the right of any technical change and improvement.
The use of these operating instructions suppose the qualification of the user according to paragraph
2.3 “qualified staff”.
The operating staff must be trained in accordance with the operating instructions. The operating
manual must always be available at the location where used.
1.1 Valve
data
Manufacturer:
UNI Geräte E. Mangelmann
Elektrotechnische Fabrik GmbH
Holtumsweg 13
D-47652 Weeze
Phone:
+49 (0) 2837/9134-0
Fax:
+49 (0) 2837/1444
E-Mail:
Homepage:
www.uni-geraete.de
Designation
Directly functioning, currentless closed, spring safety shut off valve with magnet drive.
Test basis:
DIN EN 264
E-DIN 3394-1
DIN 3230 T5/T6 following
Type: Working
pressure
Ambient
temperature
Medium Medium
temperature
Test pressure
(*) PT
16- EVS…
16 bar
-10°C to +60°C
Propan, Butan -30°C to +120°C
PT 16
25- EVS...
25 bar
-20°C to +60°C
Propan, Butan -30°C to +120°C
PT 25
40- EVS...
40 bar
-20°C to +50°C
Propan, Butan -30°C to +140°C
PT 40
120- EVS…
120 bar
-20°C to +60°C
Natural gas
-20°C to + 60°C
PT 180
135- EVS…
10 bar
-40°C to +80°C
Fuil oil Water
max. 100°C
PT 203
(*)
Test pressure to perform leakage test "No FUNCTION TEST"
Fitting position:
vertical or horizontal drive.
Switching cycles
:
see operating instructions (BTA) solenoid drive
Flange connection measures acc. to
DIN EN 1092-1 / ANSI 300 lbs
Flange
DN
PN
15 20 25 32 40 50 65 80 100 125 150
16-EVS
16/25 - - - O - - - - - - -
25-EVS ANSI
300lbs
- - - O O O - - - - -
40-EVS
40
- - O - - - - - - - -
O
Acceptance test certificate 3.2 possible, - not available,
