![background image](http://html1.mh-extra.com/html/uni-com/uac-01ec2/uac-01ec2_installation-manual_3669453001.webp)
Unitronics
1
Uni-COM™
Modules
Installation Guide
UAC-01EC2
SCAN
to download
The UAC-01EC2 communication module supports EtherCAT, and is compatible with the
UniStream
®
PLC (USC-B5/B10) controller series.
This guide provides basic installation information.
Technical specifications may be downloaded from the Unitronics website.
Note that:
UAC-01EC2 is compatible only with UniStream
®
PLC USC-
B5/B10.
Only one UAC-01EC2 module may be connected to a PLC.
The UAC-01EC2 must be adjacent to the CPU.
UAC-01EC2 cannot be connected to the CPU via an
expansion cable.
No other module may be installed between the CPU and
the UAC-01EC2.
Before You Begin
Before installing the device, the installer must:
Read and understand this document.
Verify the Kit Contents.
Alert Symbols and General Restrictions
When any of the following symbols appear, read the associated information carefully.
Symbol
Meaning
Description
Danger
The identified danger causes physical and property damage.
Warning
The identified danger could cause physical and property damage.
Caution
Caution
Use caution.
All examples and diagrams are intended to aid understanding, and do not guarantee
operation. Unitronics accepts no responsibility for actual use of this product based on
these examples.
Please dispose of this product according to local and national standards and regulations.
This product should be installed only by qualified personnel.
Failure to comply with appropriate safety guidelines can cause severe injury or
property damage.
Do not attempt to use this device with parameters that exceed permissible levels.
Do not connect/disconnect the device when power is on.