MS2007 Owner’s Manual - Page 5
• The LCD will show
and
.
• The LED will turn off.
* The siren chirps and light flashes during disarming will alert you if the system had been triggered while armed.
2 chirps / 2 flashes
=
normal disarming
3 chirps / 3 flashes
=
Tamper Alert - system was triggered
Silent Arming / Disarming
Your system may be optional configured to Arm and Disarm silently. This feature must be
programmed by your Authorized Ungo dealer.
Passive Arming
The system is pre-programmed for
Passive Arming
. The system arms itself automatically, each
time the ignition is turned off and all of the doors, hood and trunk are closed.
To start the Passive Arming Process:
1. Turn off the ignition.*
2. Open the door and exit the vehicle.
• Once all doors are closed and the dome light is turned off, the LED will begin to flash.
3. After 30 seconds,
• The siren will chirp (if Passive Arming with chirp is selected).
• The parking lights will flash.
• The doors will lock.**
• The status LED will flash red, indicating the system is armed.
• The LCD will display
and
.
4. The system is now armed.
* The ignition must have been on for
at least
10 seconds before the Passive Arming sequence will begin.
** If the Passive Locking feature is selected.
This feature may be disabled by your Authorized Ungo dealer.
Remote Sensor Bypass
The system can be set up so that in case of extreme weather conditions (such as high winds),
the shock sensor can be temporarily bypassed using the remote, while the system is Armed, to
prevent false alarming.
To Bypass the sensors:
1. After Arming the system, press remote Button 2 within 2 seconds.
• The siren will chirp indicating the sensors have been bypassed.
2. The sensors will remain bypassed until the next time the system is armed.
Summary of Contents for MS2007
Page 1: ......
