Remote Transceiver Layout
The Ungo MS2007 comes with a multi-function LCD Remote Transceiver featuring two-way
communication with the vehicle. Each time a remote button is pressed, the LED will flash and
the remote will beep to indicate that a transmission is taking place. If the remote is within two-
way communication range, the LCD will display the status of the system. The remote is also
equipped with a built-in chime that will play a tune as confirmation of some features such as
remote starting, clock setting, etc.
Button 1
Arms and Disarms the system. This button also activates the system’s Panic feature.
Button 2
Activates the system’s Remote Start feature.
Button 3
Activates the system’s Auxiliary Function, commonly used for trunk release.*
Button 4
Confirms the system’s status. This button also activates the LCD backlight for night time use.
LCD Display
The MS2007 Remote Transceiver is equipped with an LCD panel that displays the system’s
status information. If the remote is within range of the vehicle and a button is pressed, or the
vehicle is tampered with, the LCD display will show what action is taking place. The LCD display
is backlit for easy viewing at night and will illuminate when Button 4 is pressed, or when
confirmation of any action is reported by the vehicle.
Setting the Clock
The remote transceiver has a built-in clock that displays the current time.
To set the clock:
1. Press remote Button 2 and Button 3 simultaneously for two seconds.
• The remote will beep twice.
• The LCD will show
.
2. Press remote Button 2 to set the hour.
3. Press remote Button 3 to set the minutes. Hold Button 3 to advance the minutes rapidly.
• The hour will be displayed followed by either an “A” or “P” to indicate AM or PM.
Remote Transceiver
Page 2 - MS2007 Owner’s Manual
IV
I
II
III
Button 2
LED
Button 4
Button 1
Button 3
Summary of Contents for MS2007
Page 1: ......
