
17
KEEP BATTERIES OUT OF REACH OF CHILDREN
Swallowing may lead to serious injury or death in as little as 2 hours, due to chemical
burns and potential perforation of the esophagus. If you suspect your child has
swallowed or inserted a button battery, immediately seek urgent medical assistance.
HOW TO REPLACE THE BATTERIES:
• Pull open the battery compartment.
• Insert new batteries as indicated inside the battery compartment with the
positive and negative sides aligned.
• Replace both batteries at the same time (1.5V ‘LR44 type’ button batteries).
Do not mix old and new batteries or different battery types.
• Use only two 1.5V ‘LR44 type’ button batteries.
• Close battery compartment securely.
• Dispose of used batteries properly and immediately.
9.0 TDS METER
WARNING
BATTERIES
The TDS meter contains two button batteries. If swallowed, could cause severe
injury or death in just 2 hours. Seek medical attention immediately.
The TDS meter model HS-1510 included with the system is to measure the Total
Dissolved Solids (TDS) level in the water that comes out of the Rinse 'N' Go Max™
system. TDS is a measure of how pure the water is. Water that contains a TDS of
less than 20 ppm should not leave spotting on the vehicle. The TDS must be less
than 10 ppm for spot-free glass.
• The outer packing material can be recycled. Please recycle.
• Please dispose of used resin filter in accordance with applicable
federal, state/provincial and local laws and regulations.
Remove batteries from TDS Meter if you do not plan to use it for more than 6 months.