95
LPR Series | Universal
User’s Manual
11.6
Snapshot
This section is designed to set up detailed settings for snapshot capture when events occur. Make
sure you have enabled Snapshot function in each event section to activate this function.
Figure: Snapshot Settings
Basic Setting
Pre Event Capture Count : 1 ~ 10 (Frame)
Set a number of frames to be captured prior to an event.
Event Capture Interval : 1 ~ 10 (sec)
Set a time interval ranging from 1 to 10 seconds between each snapshot capture.
Post Event Capture Count : 1 ~ infinite (Frame)
Set a number of frames to be captured after an event occurred.