32
LPR Series | Universal
User’s Manual
Item
Option/ Range
Description
Mode
Manual
User can manually input IP address and the related
settings.
PPPoE
This is a point-to-point based protocol which offers
authentication, encryption and compression. It
predominantly authenticates user with the predefined
username and password.
DHCP
The camera will automatically obtain an available
dynamic IP address from the DHCP server each time it
connects to the LAN.
APIPA
On/ Off
APIPA (Automatic Private IP Addressing) helps reserve a
certain address block for link-local addressing, which is
substantially practical for assigning an IP address
automatically for camera when DHCP is not available
within the connected internet environment.
IPv4 Address
Manually set an IP address under IPv4.
IPv4 Subnet
Mask
Please use default address: 255.255.255.0. If subnet mask
is not properly configured, the unit may not be able to
communicate with other devices.
IPv4 Default
Gateway
Leave blank as default setting. No Default Gateway
address required if not used. Ask your network
administrator for further information.
Primary DNS
Same as above.
Secondary
DNS
Same as above.
IPv6
Enable/ Disable
Enable/ Disable IPv6 protocol.
Accept IPv6
router
advertisements
On/ Off
Check the box to activate RA (Router Advertisement)
corresponding to RS (Router Solicitation) for IPv6 address
designation.
Enable
DHCPv6
On/ Off
If enabled, the camera will automatically obtain an
available dynamic IP address under IPv6 protocol from the
DHCP server each time it connects to the LAN.
IPv6 Address
Manually set an IP address under IPv6 protocol.
Subnet prefix
length
1 ~ 128
Set prefix length for subnet.
IPv6 default
router address
Manually set a default router address under IPv6 protocol.
Subnet prefix
length
1 ~ 128
Set prefix length for subnet.
IPv6 DNS
Set a DNS (Domain Name Server) under IPv6 protocol.
