Underwriters Laboratories HNC301-VB, Quick Operation Manual

Page: 12 / 25

Network Bullet Camera ∙ Quick Operation Guide
11
Make sure that there is no reflective surface too close to the
light from the camera may reflect back into
the lens causing reflection.
around flush against the
ra body so that the foam ring
The “bottom” mark on the mounting base should align with the
“bottom” mark on the mounting bracket.
camera lens. The IR
The foam ring the lens must be seated
inner surface of the bubble to isolate the lens from the IR LEDS.
Fasten the dome cover to came
and the dome cover are attached seamlessly.
Steps:
1. Fix the mounting base to the wall.
Figure 2 ‐ 1 Fix the Mounting Base
Mounting base
2. Fix the mounting bracket with the camera to the mounting base.