Warning:
Even if the transmitter’s roll, pitch, battery status and
temperature are displayed correctly, calibration may not be
reliable due to a distorted magnetic field.
Always do the
3m calibration first.
1. Make sure that the transmitter is
working properly. Place it in the
housing.
2. Place housing containing the
transmitter in a location away
from interference.
3. Set transmitter and receiver 3m, 10m, or 20m apart
from center of transmitter to inside edge of receiver’s
base, as shown.
4. Tap
to enter
Calibration Page.
5. Tap
and
to highlight
desired distance for
calibration. Tap
three times
to start calibration and wait for
calibration to complete.
6. Calibration complete.
7. Tap
to return to Main
Page.
Page 9
3m, 10m,
20m
