UNDATEC Flow Measurement Solutions
Frank Stark - Wiesenstrasse 23 - D-75248 Oelbronn-Duerrn / Germany - T49 (0) 7237-7804
Email: [email protected]
2. Safety instructions
Safe operation is only ensured if the notes and warnings will be noted in this manual.
Important! Seal, seals and labels
Opening or removing seals or labels, eg etc. with serial numbers, will result in immediate loss
of warranty claims result.
Determination and proper use
The manufacturer is not liable for damages resulting from improper use.
Compare and information before operating the conformity of the supply voltage match the
specifications on the nameplate.
If it becomes that a safe operation is no longer possible (eg visible damage), put the appliance
out of service immediately and secure it against unintentional starting.
Improper or unauthorized use, dangers may arise from the device, which is why we refer to
consistent observance of safety notes.
Mounting, commissioning and operating personnel
Mounting, electrical installation, commissioning and maintenance of the device must be carried out only
by trained specialist personnel authorized by the plant operator.
Technical personnel must have read and understood this manual, and follow their statements.
The device may only be operated by persons who are authorized and trained by the facility operator. The
instructions in this manual must be followed.
Make sure that the device is in accordance with the electrical terminals connected correctly.
Repairs
Repairs should only be performed by trained service personnel.
Please contact in this case to the company Dömges.Detectronic UG.
Technical progress
The manufacturer reserves the right to modify technical data without special announcements on the basis
of development of technical progress. About the activities and possible extensions of this manual can be
supplied by the company Dömges Detectronic UG.
