19
S002379 4 unit swing set
EN
Assembly Instructions
STEP 1 -Assemble the top bar frame of the swing set
Connect A1, A2 and A3 secure with B1, B3, B4 and B5 as shown below.
NOTE: All round holes should be facing up and concave holes facing down.
During periods of non-use, the swing set can be disassembled and stored.
Prior to assembling this swing set, remove all parts from the carton and check to ensure
that all parts listed in the Parts List on page 12 are present. If you’re missing any of the
parts, please call our National Service Centre to have replacement parts sent out prior to
beginning assembly (details can be found in the warranty pages at the end of this manual).
NOTE: It is recommended that two adults assemble this swing set.