18
S002379 4 unit swing set
EN
Assembly Instructions Warnings
1. Place the swing set equipment on level ground and not less than 6ft (1.8m) from
any structure or obstruction such as a fence, garage, house, overhanging branches,
laundry line, or electrical wires.
2. Do not install the swing set equipment over concrete, asphalt, packed earth, or any
other hard surface; a fall onto a hard surface can result in serious injury or death to
the equipment user.
3. Adequate overhead clearance is essential. A minimum clearance from ground level
shall be recommended. Provide clearance for wires, tree limbs, and other possible
hazards.
4. Use the swing set in a well-lighted area. Artificial illumination may be required for
shady areas.
5. Secure the swing set against unauthorized and unsupervised use.
6. The owner and supervisors of the swing set are responsible to make all users aware
of practices specified in the use instructions.
TIGHTENING NUTS & BOLTS
1. For ease of installation, do not over-tighten the nuts and bolts when you are first
putting the equipment together. This will allow for some possible adjustments during
installation.
2. Once you have finished assembling each component of the play set, make sure to go
back over each step and properly tighten all nuts, bolts and plastic caps. Check the
entire unit to ensure all parts are properly assembled before allowing children to use
the swing set equipment.