�. Installation
(�) Connect AC power
This furnace requires AC���V and maximum current is ��A. This furnace should
be connected directly to over ��A breaker in a panel board. (Do not use extension
cords and connecting to other equipment. Insufficient capacity may cause a short
circuit and fire.)
(�) Parts List
After open a box, ensure there are all parts. Also, check any visual damage. If you
find any damages or defects, please contact a seller.
- Super Fast Sintering Furnace
� pc
- Manual
� pc
- Rapid Sintering Tray
� pc
- Regular Sintering Tray
� pc
- Regular Sintering Lid
� pc
- Regular Sintering Plate
� pc
- Cooling Tray
� pc
- Zirconia beads (���g)
� pc
(�) Installation
Avoid sunlight or moist when installing the product. Also, install on a level place.
Dust could damage on heating elements, thus, install in clean environment.
Place a furnace at least �� cm apart from the wall and �.� m away from the ceil-
ing. If too close to wall or ceiling, may cause a fire and damage on product.
Do not place flammable materials on the top of product. Before use, install a
ventilation system above the product to remove harmful gas during sintering.
