(�) Program Setting Information
Setting
Display
Description
T� Temp.
Set T� temp
Display > remaining time displaying window
t� �
T� Ramp Up
Set ramp up rate till T� (℃/min)
Set for Super-sintering, click “◀” button triple times.
Set ramp up rate till T� (℃/min) (���� Not use)
Set for Super-sintering, click “◀” button triple times.
Set ramp up rate till T� (℃/min) (����
>
Not use)
Cannot set for Super-sintering.
Cooling fan ON temp. (Do not change value unless
under instruction by manufacturer)
Cooling fan OFF temp. (Do not change value unless
under instruction by manufacturer)
Set cooling rate (Set lower than ��℃/min)
Setting Super-fast schedule will do an open cooling
after T� staying
Set staying time at T� temp. (hh . mm )
Set T� temp. (����
>
not use)
Set staying time at T� temp. (����
>
Not use)
T� temp. (����
>
not use)
Set staying time at T� temp. (���� >Not use)
t� �
T� Staying
t� �
T� Temp.
t� �
T� Ramp Up
t� �
T� Staying
t� �
T� Temp.
t� �
T� Ramp Up
t� �
T� Staying
t� �
T� Co
t� Co
Fan ON
S on
Fan Off
S of
※ Caution : Do not set ramp up rate over ��℃/min for a regular sintering.
Ramp up rate over ��℃ min will cause damages on the furnace and a fire.
If it is necessary, must contact the manufacturer before changes.
