EN-10
white vinegar to a full water tank (13) and close the water tank cap (11). Now shake the contents.
DO NOT
SWITCH ON THE DEVICE!.
• Let the device sit for a few hours. Then empty the water tank (13), refill it with clean water and empty
again until it is rinsed clean. Repeat these steps if there are severe calcium deposits.
Cleaning procedure for removing lime scale (descaling)
You may need to remove lime scale if your device starts to produce steam more slowly than usual, or
produces less steam or no steam at all. Lime scale can develop over time on components and greatly
affect steam performance. It is necessary to remove lime scale on a regular basis, namely every 25-50
times that the device is used, particularly in areas with hard water. The frequency of lime scale removal
depends on the hardness of your tap water and how often you use the device.
How to remove lime scale:
• Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank (13).
• Secure and position the device so steam is released away from the floor or surrounding objects and
surfaces.
• Plug the device power plug into the electrical outlet and turn the device ON by pressing the power ON/
OFF switch (7) to the “I” position and allow the unit to produce steam until the vinegar/water solution has
been used up.
• When the water tank is empty, immediately switch OFF the device by pressing the power ON/OFF switch
(7) to the “O” position.
• Repeat the procedures above as many times as necessary until a normal steam flow rate is achieved.
• Fill the water tank with fresh water and rinse and repeat 2-3 times. Then fill the water tank with fresh
water, turn ON the device and let it release steam until the water tank is empty.
• The device is now ready to be used.
Warning!
• Do not leave the device unattended during the lime scale removal process.
• Do not use chemicals for descaling
Micro-fiber and cloth care:
• Hand or machine wash at 60°C
• After washing, hang to dry
• Do not bleach
• Do not use fabric softener
• Do not iron
Storage
:
• Place the device and accessories in a dry place.
• Open the water tank cover if the device is not used for a long period of time.
5) SPECIFICATIONS
• Voltage input: 220-240 Vac – 50 Hz
• Power: 1300W
Summary of Contents for UZ-CL-STCL01
Page 1: ...USER MANUAL MODEL UZ CL STCL01 ...
Page 2: ......
Page 51: ......
Page 52: ...Version 18 6 2020 ...
