Motion Sensor Security Light
Model no
：
E-SM-1700-180-2H / ASIN no. B07V4CBHD7
Tools Required for Installation:
Phillips screwdriver, level
Quick Release Installation
CAUTION: RISK OF INJURY
●
Avoid direct eye exposure to the light source while it is on.
●
LED LIGHTS ARE EXTREMELY BRIGHT, UNDER NO
CIRCUMSTANCES SHOULD YOU LOOK DIRECTLY INTO AN
LED LIGHT, THIS MAY CAUSE IRREPARABLE DAMAGE TO THE
EYES.
●
Please dispose of packaging materials and account for all
small parts as these can be hazardous to small children.
WARNING: RISK OF BURN
● Allow fixture to cool completely before handling.
●
Do not exceed maximum voltage marked on the label.
● Keep combustible and other materials that can burn away
from the light, lamp, and lens.
READ FIRST: IMPORTANT SAFETY INSTRUCTIONS
Before you begin installing, servicing, or maintenance of this
product, follow these general precautions.
●
To reduce the risk of death, personal injury or property
damage from fire, electric shock, falling parts, cuts/
abrasions and other hazards please read all warnings and
instructions included with and on this product prior to
installation.
● For commercial installation: service and maintenance of
this product should be performed by a qualified, licensed
electrician.
● For residential installation: If you are unsure about the
installation or maintenance of this product, consult a
qualified licensed electrician.
● Do not mount the unit against flammable surfaces.
●
This product is intended to be used outdoors, and be
subject to the elements; such as rain and snow and we
recommend it to be mounted at least 6’ 6” off the ground
●
This LED product must be powered directly to a switched
circuit.
●
This product should not be used in areas with limited
ventilation or high ambient temperatures.
●
This product CANNOT be used with a dimmer switch,
motion or occupancy sensor or other electronic switching
device.
●
This product is intended to be connected to a properly
installed and grounded UL listed junction box.
WARNING: RISK OF ELECTRICAL SHOCK
● Turn off electrical power at fuse or circuit breaker box
before wiring product to the power supply.
●
Verify voltage is 220V-240V before installing.
● Make all electrical and grounded connections in accordance
with the National Electric Code and any applicable local
code requirements.
● All wiring connections should be capped with CE listed wire
connectors.
CAUTION: RISK OF PRODUCT DAMAGE
● Never connect fixture with power on.
●
Do not mount or support product in a manner that can cut
the outer wire jacket or damage the wire insulation.
● Avoid covering LED products with insulation, foam, or
other materials that will prevent convection or conduction
cooling.
●
Never connect an LED product directly to dimmer packs,
occupancy sensors, timing devices, or other related control
devices, unless individual product specifications deem
otherwise.
● LED products are polarity sensitive, ensure proper polarity
before installation.
● Electrostatic Discharge (ESD) can cause damage to LED
products. Wear personal grounding equipment during
installation and service of the product.
●
Do not touch the individual electronic components, it may
cause ESD (Electronic Discharge), shorten lamp life or alter
performance.
Installation Instructions
Part
Description
Quantity
A
Light Fixture
1
B
2
C
2
Wall Anchor (optional)
Mounting Screws
Silicon Sealant recommended (not included)
B
A
C
Figure 1:
Use screwdriver to unscrew three
screws the back cover. Open the back cover
Figure 4:
After the wire distribution using screwdriver to
complete the back cover is secured to the lamp
body (3 screws)
Figure 2:
Using the accessories Package's screws and scree
peg to fixed wallbox horizontally to the wall
Figure 3:
CONNECTION
Connect the cable to the terminal block on the
wallplate as follows (see connection diagram):
NEUTRAL (Blue) N
EARTH (Green/Yellow)
LIVE (Brown) L
EARTH (Green/Yellow)
LIVE (Brown) L
NEUTRAL (Blue) N
AC CORD (not included)
