UMC M22/15B-GB-TCDI-UK, User Manual

Page: 9 / 50

GETTING STARTED - INITIAL SET UP
9
TUNING IN
IMPORTANT — Please ensure the TV has reached room temperature before connecting the power for
the first time
1) Connect the mains lead to rear of the TV and the plug to the wall. Switch on the TV at the power
switch on the side.
2) Connect the RF Cable supplied to the 'RF - In ' on the rear of the TV and connect the other end of
the cable to your TV Aerial outlet
3) Install batteries in the remote control and press the red [POWER] button to turn on the TV.
The ‘First Time Installation’ menu should now appear. If it does not, please press [MENU] 8888 the menu will
appear.
4) Press [OK] on the remote control whilst ‘OK’ is highlighted on screen.
Tuning will now take place.
5) After tuning has taken place you will be taken to the program edit screen where you can move the
location of channels. Alternatively if it does not find any channels the below screen will appear and you
should investigate as to why your TV is not receiving a signal.
IMPORTANT - WE RECOMMEND YOU CONNECT TV'S WITH BUILT IN DIGITAL/FREEVIEW TO
SUITABLE AERIALS. I.E LOFT AERIAL OR OUTDOOR ROOF AERIAL. ALSO, PLEASE CHECK YOU
LIVE IN AN AREA THAT CAN RECIEVE DIGITAL/FREEVIEW STATIONS. WE DO NOT RECOMMEND
USING WITH INDOOR AERIALS UNLESS YOU ARE IN 100% COVERAGE AREA AND ALSO THAT
THE INDOOR AERIAL ISAMPLIFIED/HAS BUILT IN BOOSTER AND IS CAPABLE OF RECIEVING
DIGITAL/FREEVIEW. WE RECIEVE MANY CALLS TO OUR HELPLINE FROM CUSTOMERS ADVISING
THEY CANNOT RECIEVE DIGITAL/FREEVIEW CHANNELS. OFTEN, SIMPLY CONNECTING A
'BOOSTER' BOX IN BETWEEN THE TV AND THE AERIAL SOCKET SOLVES 95% OF CASES.
BOOSTERS/AMPLIFIERS ARE AVAILABLE FOR AROUND £10-£15 FROM MOST RETAILERS
IMPORTANT - AFTER TUNING DO NOT PRESS ANY BUTTONS FOR 20 SECONDS SO THE
CHANNEL INFORMATION CAN BE STORED.
First Time Installation
Country
Language
Please ensure that the aerial is connected to the connector
labelled ‘ RF In ’ on the rear of the TV .Ensure that OK is
highlighted in yellow and press ‘OK’ on your remote .If after
this scan ,not all digital channels are found ,your aerial may
require a signal booster .alternatively ,upgrade your aerial
to a high gain digital version .
OK Cancel
UK
English
HDMI In RF In
First Time Installation
Unfortunately the TV did not find any channels.
Please check your aerial connection
and refer to the user manual.
Do you wish to re tune your TV.
Yes Do it next time
No
teac english manual 09.pdf 24/03/2009 15:19:18