UMC E156/13B-GB-TCD-UK, User Manual

Page: 55 / 60

Question:
I have tuned in Digital TV but
I am not receiving any or all of the
channels and/or the channels I receive
are breaking up
The sound quality is high pitched?
I have inserted a disc but it is not playing
I have connected the TV to my VCR via
SCART but it is not recording
Solution:
1) Check you are in an area that can
receive Freeview. Visit
www.freeview.co.uk or call
08701 111 270.
2) Check you have a suitable aerial.
Many indoor aerials will say they are
digital ready, but you will not get
a good signal
3) Consider purchasing a signal booster,
it is much cheaper than a digital aerial
and cures 70% of poor signal problems.
4) Failing the above for now use the
For best performance we recommend using an
outdoor hi-gain digital aerial. If you are receiving
some digital channels but not all of them, first try
to connect a signal booster in between the TV
and TV aerial socket
analogue TV, until the signal becomes
stronger in your area.
Go into the sound settings menu as
shown earlier in the manual and increase
the level of the bass and decrease
the treble
1) Ensure you have put the disc as shown
on the diagram next to the DVD loading slot.
2) Ensure the disc is clean and is not
scratched
3) Some copied discs will not play.
In addition to connecting via SCART, you
should connect the aerial cable from the
wall socket to VCR and another aerial
cable from the VCR to the TV
53
Frequently Asked Questions
Satety
Warnings
Introducing
the
LCD
TV
Installing
the
LCD
TV
Using
The
F
eatures
Troubleshooting
Specifications
I have connected the TV to my VCR via
SCART but it is not recording In addition to connecting via SCART, you
should connect the aerial cable from the
wall socket to VCR and another aerial
cable from the VCR to the TV
new logik english manual 50.pdf 25/03/2009 15:16:10