UMC E156/13B-GB-TCD-UK, User Manual

Page: 50 / 60

100
IMPORTANT— BEFORE DRILLING ANY HOLES IN THE WALL ENSURE
YOU ARE NOT DRILLING WHERE THERE COULD BE ANY ELECTRIC
WIRES, WATER OR GAS PIPES
THESE MODELS REQUIRES A VESA 100 WALL MOUNT.
To remove the stand
1) Remove the five screws highlighted below
2) The stand will now come off
3) There is a blank panel included in the box, this should be inserted into where the stand
was removed
4) Re-insert the screws
Wall Mounting the TV.
1) Remove the four screws highlighted below.
2) The wall mount can now be easily attached to the mounting holes on the rear of the TV.
These holes are indicated in the picture below
Wall Mounting
48
Satety
Warnings
Introducing
the
LCD
TV
Installing
the
LCD
TV
Using
The
F
eatures
Troubleshooting
Specifications
Important – If wallmounting this TV, only use the screws already
provided in the wallmounting holes. Using other screws which
are longer could cause irreparable damage to internal parts.
new logik english manual 47 umc.Page 1 25/03/2009 16:20:49