![background image](http://html1.mh-extra.com/html/umax-technologies/powerlook-3000/powerlook-3000_operation-manual_837915009.webp)
3
Preparing the Scanner
Prepare your scanner for installation through the following simple steps:
!
Check and reset (if necessary) the scanner’s SCSI address
!
Run the automatic scanner self-test
Testing the Scanner
The scanner automatically performs a simple self-test each time it is turned on. This
self-test checks the status of certain scanner devices.
After unpacking, start the scanner self-test by following the steps below:
1.
Connect the power cord to a wall outlet.
2.
Connect the other end of the power cord to the scanner.
3.
Turn on the power of the scanner.
At power-on, the front panel indicators flash once. The power indicator then glows
and the ready indicator blinks. When the test is completed, the power and ready
indicators glow steadily.