5.
6.
1.
2.
Secure the card into place with the screw removed from the expansion slot cover in step 3
above.
Replace the housing cover following the instructions provided in the computer’s reference
manual.
Connect the Scanner to the Computer
With settings on the scanner and card correctly set and the interface card properly installed in your
computer, you can now connect the scanner and the computer, as follows:
Connect the IEEE 1394 cable connector to the interface card in the PC.
Connect the other end of the IEEE 1394 cable to the scanner.
3.
4.
5.
Connect the power cord to the scanner.
Turn on the scanner power.
Turn on the computer power.
Hardware installation is now complete.
Get ready to run the UMAX Setup program to install the supporting UMAX software supplied with
your system.
10