Universal mount (optional):
The receiver can be installed on levelling staffs with the aid of
the universal mount. To do this, insert the universal mount
into the laser receiver and secure on the levelling staff with
the aid of the screw. To release the universal mount from the
laser receiver, turn the quick release lock in the direction of the
arrow.
DuraMax
ENGLISH
Working with the SensoCommander (optional)
Volume
adjustment:
Volume adjustment fea-
ture on SC 120 and Pro.
Precision range:
Mode with smaller
tolerance for precise
alignment (e.g. with
measuring staff).
Free-hand range:
Mode with greater
tolerance for less precise
alignment by hand.
Control panel SC 120 / Pro
14
Switchover between
X and Y axes in tilt or
calibration mode
15
Sound volume /
axis adjustment in tilt
or calibration mode
16
Hand receiver mode
17
Save calibration
The SensoCommander can recognise the laser beam over
long distances. Set the device to hand receiver mode
(press button 16). Move the SensoCommander up and
down through the laser beam until the middle display
appears. Now mark the height on the all-round marking
groove. The Spotlite additionally shows the measured
height.
14
15
17
1
2
Note:
The laser receiver has two tolerance settings: Precision and free-hand
setting. On the SensoCommander 120, the settings are indicated by LEDs:
precision setting: green; free-hand setting: orange. On the SensoCommander
Pro and Classic, changeover between the settings is done by the
button.
19
16
