DuraMax
Deutsch
1
ENGLISH
Operation of the DuraMax
Charging the batteries
• Before using the DuraMax, fully charge
the batteries
• Open the battery compartment (K),
insert the batteries and connect the
plugs to the sockets. The plugs fit in the
sockets in one position only (see pictures
on right). Reclose the battery
compartment.
• Connect the battery charger/mains unit
to a mains source and plug into the sok-
ket (N). Please only use the
charger/mains unit supplied with the
device. If a different one is used, the
warranty will become void.
• The device can also be operated with standard alkali batteries (4 x type D).
Insert the batteries as shown by the installation symbols. Ensure the
polarity is correct.
• If the LED (F) blinks constantly, either the batteries must be exchanged or
recharged.
Insertion of batteries in the SensoCommander:
• Remove the battery cover (9) and insert the batteries as shown by the
installation symbol, ensuring that the polarity is correct. Then replace the
cover.
• To extend battery life, the receiver switches off automatically after about
5 minutes if not used.
Note:
Do not expose batteries to excessive heat such as sunshine, fire, etc. Dry
batteries must not be recharged. Used batteries must not be disposed of as
household waste. Please take them to a collection point for used batteries or for
special waste. Ask your local authority for further details. Batteries with the
recycling symbol can also be returned to our dealerships or to our Technical
Service.
17
