REGULATIONS
This section describes the machine’s general safety and maintenance work rules.
SAFETY REGULATIONS
- In the event of having to carry out work on the engine while this is running, ensure that the area is well
ventilated, where possible using extractor fans. Never leave engines running in closed spaces. Exhaust gases
are poisonous.
- Petrol is extremely inflammable and in certain conditions may explode. Smoking must not be allowed in the
work area, nor should there be naked flames or sparks.
MAINTENANCE REGULATIONS
Use genuine UM spare parts and lubricants recommended by UM. Non-genuine or unauthorised parts
may damage the machine.
Only use the specific tools intended for this machine.
During assembly, always use new gaskets, oil seals, piston rings and keys.
After dismantling, clean the components with solvents that are non-inflammable or with a high flammability
point. Grease all working surfaces before assembling, excluding tapered joints.
After assembly, check that all components have been correctly fitted and that they are functioning perfectly.
For dismantling, checking and assembly operations use only tools with metric measurements. Metric screws,
nuts and bolts are not interchangeable with imperial measurement joining devices. Using unsuitable tools
and joining devices may damage the machine.
In the case of work on the machine’s electrical circuitry, check that electrical connections have been correctly
fitted, especially the earth connections.
4
GENERAL INFORMATION
WORKSHOP MANUAL
Summary of Contents for DSR ADVENTURE 125
Page 1: ...ENGINE 125 4T 4V 6M EURO 4 WORKSHOP MANUAL...
Page 3: ......
Page 118: ...22 figure 33 figure 34...
Page 120: ...ummotorcycles eu umglobal com...
