um Chill 125 EFI, User Manual

Page: 15 / 48

MODIFICATIONS
Any modifications to this motorcycle, removal of
original equipment or use of unapproved accessories,
may cause it to be unsafe for use and may trigger
severe accidents. Some modifications may also make
your motorcycle illegal to use on public roadways, and
will void all warranty coverage.
Your dealer is familiar with all recommended
accessories for your motorcycle, and should be
consulted before installing any accessories. The
owner of the motorcycle is responsible for the safety,
installation and usage of any accessories not
approved by UM.
Before installing new accessories, make sure they do
not interfere with moving parts, reduce ground
clearance, and do not interfere with the operating
controls.
BREAK - IN
The long term wear and duration of your motorcycle
depends of the way you treat it during the first days of
operation and the first 1000 kilometers. During this
period, limit full throttle operation, and avoid driving at
high speeds and any condition that may result in
engine overheating. Do not exceed
4 5 Km during
the initial running-in period.
The recommended maximum speeds in kilometers
per hour during the initial running in period, and the
next 1000 kms are the following :
break-in period.
starting the engine. Allow the engine to warm
up for a minute at low rpm so that proper
lubrication reaches the top end of the motor.
to maintain proper engine revolutions.
14
MAX
SPEED
UM CHILL
50-125 SERIES