background image

Dealer Name & Address, Stamp

WARRANTY REGISTRATION FORM

The UM dealers are required to register the sale of the motorcycle with up to date information  regarding the original owner, in 

regular mail. This information is necessary for notification, in case your motorcycle is affected by a service bulletin or campaign.

OWNERSHIP & VECHICAL INFORMATION

Customer Name  : __________________________________________________________________________________________________________________

Address  : ________________________________________________________________________________Pin Code: ______ 

_ ___ ___________________ ___

City  : __________________________________  State : ___________________________________________ Country : ________________________________

Mobile Number  : _________________________ E-mail : ___________________________________________________________________________________

Frame No  : _____________________________________________________________  Model : ___________________________________________________

Engine No  : ______________________________________________________________Color : ___________________________________________________

Battery Make  : _______________________________________________ Battery Sr. No/Code : ___________________________________________________
Tire Make  : _____________________________________________________________Tire No  : __________________________________________________
Date of Sale : _______________________________  KM  : ______________________________  Key No : __________________________________________
Dealer Name :  _____________________________________________________________________________________________________________________
Location : ___________________________________________________Code No : _____________________________________________________________
Reg No : ________________________________________________   Contact No :  _____________________________________________________________ 

To be retained by selling deale

r

4

4

Customer Signature

 

UM CHILL

50 - 

125 SERIES

Summary of Contents for Chill 125 EFI

















































Reviews: