ii
Safety Precautions
Before using the AC adapter for the display ISG1, read this manual and the following safety precautions.
ULVAC is not liable for any accidents or injuries caused by negligence of these safety precautions.
Check line voltage
Before turning on power, make sure that the operating voltage and supply
voltage are in agreement. If incorrect power is applied, damage or fire can
result.
Check line voltage
Use this instrument within the scope of specifications.
Damage or fire can result.
Don’t disassemble
Do not disassemble the AC adapter.
Don’t modify
Do not modify the AC adapter. If modified, its action is not guaranteed.
Also it can be a cause of fire or electric shock.
Grounding
Connect the instrument to ground to prevent electric leak.
Turn off power
If the AC adapter fails, immediately turn off the power. Otherwise, fire or
electric shock can result.
Turn off power
If the AC adapter is overheated or gives out smoke or unusual smell,
immediately turn off the power. Otherwise, fire or electric shock can result.
For safety, contact your local ULVAC representative or ULVAC, Inc.,
Japan for repair.
Operating environment
Do not use this instrument in a place where it may be splashed with water.
If it is wetted with water, failure, electric leak or fire can result.
Check connection
Before turning on power, make sure that the AC adapter is correctly
connected. Otherwise, components may be damaged.
No vibration
See to it that no vibration or impact is given to the AC adapter. If given, it
may be damaged.
Operating conditions
Use this instrument within the scope of specifications.
Caution in repacking and shipping back
Repack the AC adapter as shipped from the factory. If it is shipped bare, it
may be damaged.
Discarding
If the AC adapter and its parts are to be discarded, dispose of them
according to your local government regulations. If the analyzer tube or
parts were used in an environment that can affect the human body, dispose
of them through a disposal company.
Discarding
If this unit is discarded, follow the regulations of your local government.
If the sensor head was used in an environment that can cause danger to
human body, dispose of it through a specialized refuse disposal agency.
Incidentally, expenses for discarding the instrument are on the user’s
account.
