-5-
３．
Installation
3.1 Installation
Select a location with as little dust and humidity as possible for the installation, and
ensure that the pump is installed level. Select a location that will enable installation,
removal, inspection, and cleaning operations.
Pay attention to the ambient temperature, especially when installing the pump inside
another device. Place the pump on anti-vibration rubber, etc. to ensure that
vibrations do not reach the pump.
Refer to “0.4.2 surroundings during storage, mounting, and operation” regarding the
ambient conditions.
Fig. 2 How to move the sealed rotary vacuum pump
The pump weighs 20kg or more, and lifting or moving it alone may therefore result in
injury. Failure to do so may result in injury or fire.
Always ensure that at least two people perform the installation as shown in Fig. 2.
The pump will break if operated on an incline, on its side, or upside down. Ensure
that the intake is on the top, and that the pump is level.
Do not use the pump in an explosive atmosphere. Use under such conditions may
result in fire.
Attention
Caution
Warning
