SK00-9663-EI-003-00
IV
*
WARNING
*
Power on
After connecting the sensor, display, PLC (programmable logic
controller), cable, etc. to this unit, turn on the power. Doing so may
damage this unit or the equipment connected to this unit or cause a
fire. In addition, the filament of the sensor may be disconnected.
*
WARNING
*
Excessive pressure in the vacuum chamber
Do not connect to a place where the pressure inside the sensor
exceeds atmospheric pressure. If the pressure inside the sensor
exceeds atmospheric pressure, the sensor will be damaged and the
sensor will pop out from the connection and cause harm to the
surroundings including the human body. When the pressure exceeds the
atmospheric pressure, install an isolation valve so that the pressure
inside the sensor does not exceed the atmospheric pressure.
*
WARNING
*
Disassembly prohibited
Do not disassemble this unit. It may cause a fire or electric shock.
If disassembled, the operation cannot be guaranteed.
*
WARNING
*
No modification
Do not modify this unit. It may cause a fire or electric shock. If
you modify it, we cannot guarantee its operation.
*
WARNING
*
Usage environment
Use this instrument within the environment specified in the
specifications.
*
WARNING
*
Usage environment (condensation, humidity, temperature)
Do not use it in a place where this unit is exposed to water or where
the humidity is high and condensation occurs. If water gets inside
this unit, it may cause a malfunction, electric leakage, or fire.
Also, using it outside the specified temperature range may cause a
malfunction or fire.
*
CAUTION
*
Precautions when laying cables
When laying a communication transmission line in a device, make sure
that the wiring is not close to or parallel to the power line, power
line, high voltage line, high frequency line, etc. It may cause a
malfunction.
*
CAUTION
*
Ensuring ventilation
Do not put the instrument in a closed container, and be sure to
install it in a well-ventilated place. If sealed, the temperature of
the electronic components inside the power supply will rise, which may
shorten the service life.
*
CAUTION
*
Usage environment
When exposed to chemically active gas such as halogens and halogen-
based gases, problems such as disconnection of filaments and changes
in pressure characteristics occur. When using in such an environment,
install an isolation valve between this unit and the vacuum chamber to
protect it from exposure to these gases as much as possible.
Summary of Contents for G-TRAN SW100-A
