SK00-9663-E8-003-00
1.
Specification
The Pirani vacuum gauge sensor unit SW100 is a vacuum gauge that can measure the
low vacuum pressure by connecting a dedicated sensor (SWP series).
SW100 is the next model to the conventional model SW1. SW100-A is compatible with
SW1-1, and SW100-R is compatible with SW1-2.
The following two types of interfaces are available. You can select the
specification that best suits the communication type.
Analog output type
: SW100-A (Next model of SW1-1)
Serial communication type : SW100-R (Next model of SW1-2)
(Hereinafter, SW100 refers to both SW100-A and SW100-R.)
The I/O connector of SW100 uses a D-sub 15pin and USB Type-C.
SW100 is set with the dedicated Windows/Android application "UL-MOBI".
※
"UL-MOBI" can be downloaded from our homepage or Google Play. For details,
refer to the SW100 instruction manual.
※
USB Type-C can be connected to a Windows/Android device with UL-MOBI installed
using the USB cable, and can be monitored and set by UL-MOBI.
※
UL-MOBI for Windows requires a Windows device with a USB device driver
installed. For details, please refer to the SW100 instruction manual.
※
Settings that require UL-MOBI are SET POINT, OUTPUT, ADDRESS, BAUD RATE, and
CHECKSUM. For details, please refer to the SW100 instruction manual.
※
Windows/Android devices and USB cable are not included.
Name
Pirani vacuum gauge sensor unit
Type
Analog output
Serial communication
Model
SW100-A
SW100-R
Compatible sensor
※
Includes the
selected one
Sensor for SW100: 1pc.
SWP-16 (NW16), SWP-25 (NW25), SWP-R1/8 (R1/8),
SWP-P18 (
φ
18mmtube), SWP-P15 (
φ
15mmtube),
SWP-CF16 (ICF034), SWP-1S (ASME BPE sanitary1”)
※
See Section 6.2
Measureable
pressure range (N
2
)
5×10
-2
Pa to 1×10
+5
Pa
Measurement
accuracy
※
1
(N
2
)
1×10
-1
Pa to 1×10
+4
Pa :±10%
5×10
-2
Pa to 1×10
-1
Pa
1×10
+4
Pa to 1×10
+5
Pa
:±20%
Summary of Contents for G-Tran Series
Page 17: ...SK00 9663 E8 003 00 Diagrams...
