Ultrasound Technologies PD1 series, Service Manual

Page: 5 / 75

Ultrasound Technologies Ltd
©Ultrasound Technologies Ltd Page 1 of 32
PD1 / FT120 service manual Issue 3 January 2007
1.
7
General Introduction
1.1.
4 7
Introduction
This service manual is written to support the maintenance and repair of the PD1 Series Doppler detectors.
Servicing of this equipment should be performed by a qualified technician, after carefully studying this manual.
The drawings and circuit descriptions in this manual are correct as of the date it was prepared, however, however the Company
reserves the right to make changes to improve the operation of the instrument. If your instrument does not exactly match the
information in this manual, contact the manufacturer or distributor for revision information.
Inspect the instrument upon receipt, in the unlikely event that the unit has been damaged, notify your distributor or Ultrasound
Technologies directly at the following address: -
Ultrasound Technologies Ltd.,
Lodge Way, Portskewett
4 8
Caldicot, NP26 5PS
South Wales , UK
Telephone: +44 (0) 1291 425425
FAX: +44 (0) 1291 427093
4 9
E-mail: service@doppler.co.uk
Retain the packing material for possible future use.
Important Note:
In the unlikely event that the instrument must be returned to Ultrasound Technologies for service or for any other reason, use
the same packing material in which the instrument was delivered.
If this is not available, the instrument should be packed in such a way that will provide adequate packing. The Company will not
accept any responsibility for loss or damage due to improper use of packing material.