UltraSonic LLC. Model Ultra 3200FA
2
SAFETY REQUIREMENTS
All personnel must read this user guide before attempting to operate, maintain, or service
the UltraSonic LLC Cleaning Equipment.
HAZARDS
High voltages are present, ALWAYS disconnect unit from power source before
attempting any maintenance or service procedure.
Hot water; do not place unprotected hands in tank. Use baskets with lifting
mechanism to insert or remove parts from tank.
Read MSDS sheet for cleaning agents recommended for the system. Note the
requirements for personal protection listed on the MSDS.
Make sure equipment is properly installed in accordance with all electrical codes.
Never operate this equipment in an ungrounded condition.
Never attempt to perform maintenance when cleaning solution is hot.
Never open equipment or attempt service/warranty related repairs without first
contacting UltraSonic LLC for safe and proper procedures.
SAFE OPERATION
Do not immerse hands or other body parts in the ultrasonic tank. Cleaning agents and
contaminants can cause skin irritation and exposure to high intensity ultrasonic
energy should be avoided.
Do not operate system using volatile, explosive, combustible or acidic liquids (pH
less than 7). Unauthorized cleaning agents, not approved by UltraSonic LLC, will
invalidate warranty and may cause damage to system.
Parts may be gently rested on the rack on the bottom of the tank. Avoid
dropping parts on this which may result in tank damage and void your
warranty.
Do not operate the system unless the tank is full. Operating at less than full capacity
may result in damage and void the warranty.
