normally open micro switch or self-locking switch
2,7
input
24V voltage, emergency stop when connected, typical application
is to connect a normally open micro switch or self-locking switch
4,8
output 24V output voltage, connected to a solenoid valve for controlling
the lifting of the welding head of the cylinder.
Besides, pins 6, 7, and 8 are the same ground, so 6/7/8 can share a line
Attention
The power plug must be inserted into a socket with a ground terminal. The adaptable power supply
range of the ultrasonic signal generator is 220VAC ± 10% @ 50 / 60Hz. By adjusting the internal
settings of the generator, it can also adapt to a power supply range of 110VAC ± 10% @ 50 / 60Hz.
Using 110V without adjustment can almost only be used for cutting and atomizing. The minimum
diameter of the power connection cable is 1.5mm².
4. Display interface and parameter introduction
4.1 Automatic mode interface (long wave mode, continuous working
mode)
