Ultrasonic 2400FA Operational Instruction Manual Download Page 16

UltraSonic LLC. Model Ultra 2400FA   

                 

16 

WARRANTY 

 

 
UltraSonic LLC Cleaning Equipment is guaranteed to be free from defects in materials 
and workmanship for one (1) year from the date of shipment under normal use and 
operating conditions. 
 
UltraSonic LLC shall repair or replace, at its option, any component covered by this 
warranty which is determined by UltraSonic LLC to be defective in material or 
workmanship within the one (1) year warranty period.   
 
This warranty is limited to the original purchaser and is not transferable.  Freight charges 
for equipment returned are the responsibility of the user. 
 
Total liability for any reason whatsoever, shall not in any case exceed the cost of repair or 
replacement of the defective part.  Such repair or replacement shall be the exclusive 
remedy available in connection with this warranty.  In no case shall UltraSonic LLC be 
responsible for any incidental or consequential damages. 
 

This warranty does not apply to: 
 

 

Equipment or components subjected to misuse, improper installation, alteration, 
modification, neglect or accident. 

 

Use of unauthorized cleaning agents, not approved by UltraSonic LLC. 

 

Normal wear such as cavitation erosion of tank and transducer surfaces. 

 

Non-compliance with all procedures as outlined in the Operational & Instruction 
Manual. 

 

Parts having a useful life less than one (1) year, e.g. bulbs, fuses or similar parts. 

 

Claims or estimates of performance and production specifications. 

 

Applicability of use for a particular purpose unless specifically contained in writing 
by UltraSonic LLC. 

 
 

Except as specifically provided herein; UltraSonic LLC grants no other warranty, either 
expressed or implied.  UltraSonic LLC shall in no event be liable for damages of any 
kind as a result of or relating to the sale or use of the products whether such damages are 
direct, indirect, special, incidental or consequential

 

  
 
 
 
 
 
 

 

WARRANTY REGISTRATION

 

Summary of Contents for 2400FA


















Reviews: