UltraPlus X-9200HD PVR, User Manual

Page: 56 / 86

56

Dynamic settings (RED key)
- You can make your DDNS setting in this menu by
pressing the
RED colored button.
- For more details about your DDNS settings,
please ask your local DDNS service provider.

Wireless LAN can be supported by using the
‘USB to
Wi-Fi’
module connected (*Option)
- By pressing the BLUE colored button, you can
automatically find and apply the settings for your
AP.
- For the information on the Wireless Wi-Fi settings,
please refer to the AP manual.
NOTE : The speed and latency of the Wireless
LAN function is slower than the Wired LAN. So, it may take much longer to copy files.
NOTE : Only a limited range of Wireless LAN adaptors are supported. So, you MUST check
that they are supported types BEFORE you purchase.
3.5 System Recovery

System restore to factory default : Restore the
factory set values in case the user has encountered
some problems after changing parameters in error.
Press the
OK button to erase all services and restore
default setting.

Reset Configuration data : Maintain the
service data and reset the configuration data.

Reset Service data : Maintain configuration
data and reset the service data.

System restore to stored position : Restore the stored values including service data and system
parameters. Press the OK button to restore all data.

Store system data : If you want to use system parameters and service data in the future, this menu
allows you to store current state. Press the OK button to store current state.

Delete store position : Delete stored system data.
3.6 System Information
This menu displays general information about the hardware and software version of your receiver.